Cisco IOS: SNMP Config

Description

The Cisco IOS: SNMP Config is used to check the properties of specific output lines from a Simple Network Management Protocol (SNMP) configuration. Tests if lines under the global context associated with snmp have a specifiec access list or community name.

The snmp_object element is used by a snmp test to define those objects to be evaluated based on a specified state. There is actually only one object relating to snmp and this is the system as a whole. Therefore, there are no child entities defined.

The snmp_state element defines the specified access list and community name under evaluation.

Technical Details

Artifact Parameters

cisco_ios.snmp

Name	Type	Description
N/A

Supported Test Types

• Existence Test

• Cisco IOS: SNMP

Test Type Parameters

existence_test

Name	Type	Description
value	string	Value.

cisco_ios.snmp

Name	Type	Description
operator	string	Comparison operator.
access_list	string	The defined SNMP Access List.

NOTE: The operator parameter is governed by a constraint allowing only the following values:

• bitwise and

• bitwise or

• case insensitive equals

• case insensitive not equal

• equals

• greater than

• greater than or equal

• less than

• less than or equal

• pattern match

• not equal

• set white list

• set is empty

Generated Content

existence_test

XCCDF+AE

This is what the AE check looks like, inside a Rule, in the XCCDF.

<xccdf:complex-check operator="AND">
  <xccdf:check system="https://benchmarks.cisecurity.org/ae/0.5">
    <xccdf:check-content>
      <ae:artifact_expression id="xccdf_org.cisecurity.benchmarks_ae_[SECTION-NUMBER]">
        <ae:artifact_oval_id>[ARTIFACT-OVAL-ID]</ae:artifact_oval_id>
        <ae:title>[ARTIFACT-TITLE]</ae:title>
        <ae:artifact type="[ARTIFACT-TYPE-NAME]">
          <ae:parameters />
        </ae:artifact>
        <ae:test type="[TEST-TYPE-NAME]">
          <ae:parameters>
            <ae:parameter dt="string" name="value">[value.value]</ae:parameter>
          </ae:parameters>
        </ae:test>
        <ae:profiles>
          <ae:profile idref="xccdf_org.cisecurity.benchmarks_profile_Level_1" />
        </ae:profiles>
      </ae:artifact_expression>
    </xccdf:check-content>
  </xccdf:check>
</xccdf:complex-check>

SCAP

XCCDF

For cisco_ios.snmp existence_test artifacts, the XCCDF check looks like this. There is no Value element in the XCCDF for this artifact.

<check system="http://oval.mitre.org/XMLSchema/oval-definitions-5">
  <check-content-ref
    href="[BENCHMARK-TITLE]-oval.xml"
    name="oval:org.cisecurity.benchmarks.[PLATFORM]:def:[ARTIFACT-OVAL-ID]" />
</check>

OVAL

Test

<snmp_test
  xmlns="http://oval.mitre.org/XMLSchema/oval-definitions-5#ios"
  id="oval:org.cisecurity.benchmarks.[PLATFORM]:tst:[ARTIFACT-OVAL-ID]"
  check_existence="[check_existence.value]"
  check="all"
  comment="[ARTIFACT-TITLE]"
  version="1">
  <object object_ref="oval:org.cisecurity.benchmarks.[PLATFORM]:obj:[ARTIFACT-OVAL-ID]" />
</snmp_test>

Object

<snmp_object
  xmlns="http://oval.mitre.org/XMLSchema/oval-definitions-5#ios"
  id="oval:org.cisecurity.benchmarks.[PLATFORM]:obj:[ARTIFACT-OVAL-ID]"
  comment="[ARTIFACT-TITLE]"
  version="1" />

State

N/A

YAML

artifact-expression:
  artifact-unique-id: "[ARTIFACT-OVAL-ID]"
  artifact-title: "[ARTIFACT-TITLE]"
  artifact:
    type: "[ARTIFACT-TYPE-NAME]"
    parameters:
  test:
    type: "[TEST-TYPE-NAME]"
    parameters:
      - parameter:
          name: "value"
          dt: "string"
          value: "[value.value]"

JSON

{
  "artifact-expression": {
    "artifact-unique-id": "[ARTIFACT-OVAL-ID]",
    "artifact-title": "[ARTIFACT-TITLE]",
    "artifact": {
      "type": "[ARTIFACT-TYPE-NAME]",
      "parameters": []
    },
    "test": {
      "type": "[TEST-TYPE-NAME]",
      "parameters": [
        {
          "parameter": {
            "name": "value",
            "type": "string",
            "value": "[value.value]"
          }
        }
      ]
    }
  }
}

Generated Content

cisco_ios.snmp

XCCDF+AE

This is what the AE check looks like, inside a Rule, in the XCCDF

<xccdf:complex-check operator="OR">
  <xccdf:check system="https://benchmarks.cisecurity.org/ae/0.5">
    <xccdf:check-content>
      <ae:artifact_expression id="xccdf_org.cisecurity.benchmarks_ae_[SECTION-NUMBER]">
        <ae:artifact_oval_id>[ARTIFACT-OVAL-ID]</ae:artifact_oval_id>
        <ae:title>[ARTIFACT-TITLE]</ae:title>
        <ae:artifact type="[ARTIFACT-TYPE-NAME]">
          <ae:parameters />
        </ae:artifact>
        <ae:test type="[TEST-TYPE-NAME]">
          <ae:parameters>
            <ae:parameter dt="string" name="operator">[operator.value]</ae:parameter>
            <ae:parameter dt="string" name="access_list">[access_list.value]</ae:parameter>
          </ae:parameters>
        </ae:test>
        <ae:profiles>
          <ae:profile idref="xccdf_org.cisecurity.benchmarks_profile_Level_1" />
        </ae:profiles>
      </ae:artifact_expression>
    </xccdf:check-content>
  </xccdf:check>
</xccdf:complex-check>

SCAP

XCCDF

For cisco_ios.snmp cisco_ios.snmp artifacts, an XCCDF Value element is generated.

<Value
  id="xccdf_org.cisecurity.benchmarks_value_[ARTIFACT-OVAL-ID]_var"
  type="string"
  operator="[operator.value]">
  <title>[RECOMMENDATION-TITLE]</title>
  <description>This value is used in Rule: [RECOMMENDATION-TITLE]</description>
  <value>[value.value]</value>
</Value>

For cisco_ios.snmp cisco_ios.snmp artifacts, the XCCDF check looks like this.

<check system="http://oval.mitre.org/XMLSchema/oval-definitions-5">
  <check-export
    export-name="oval:org.cisecurity.benchmarks.[PLATFORM]:var:[ARTIFACT-OVAL-ID]"
    value-id="xccdf_org.cisecurity.benchmarks_value_[ARTIFACT-OVAL-ID]_var" />
  <check-content-ref
    href="[BENCHMARK-TITLE]-oval.xml"
    name="oval:org.cisecurity.benchmarks.[PLATFORM]:def:[ARTIFACT-OVAL-ID]" />
</check>

OVAL

Test

<snmp_test
  xmlns="http://oval.mitre.org/XMLSchema/oval-definitions-5#ios"
  id="oval:org.cisecurity.benchmarks.[PLATFORM]:tst:[ARTIFACT-OVAL-ID]"
  check_existence="any_exist"
  check="all"
  comment="[ARTIFACT-TITLE]"
  version="1">
  <object object_ref="oval:org.cisecurity.benchmarks.[PLATFORM]:obj:[ARTIFACT-OVAL-ID]" />
  <state state_ref="oval:org.cisecurity.benchmarks.[PLATFORM]:ste:[ARTIFACT-OVAL-ID]" />
</snmp_test>

Object

<snmp_object
  xmlns="http://oval.mitre.org/XMLSchema/oval-definitions-5#ios"
  id="oval:org.cisecurity.benchmarks.[PLATFORM]:obj:[ARTIFACT-OVAL-ID]"
  comment="[ARTIFACT-TITLE]"
  version="1" />

State

<snmp_state
  xmlns="http://oval.mitre.org/XMLSchema/oval-definitions-5#ios"
  id="oval:org.cisecurity.benchmarks.[PLATFORM]:ste:[ARTIFACT-OVAL-ID]"
  comment="[ARTIFACT-TITLE]"
  version="1">
  <access_list
    operation="[operation.value]"
    var_ref="oval:org.cisecurity.benchmarks.[PLATFORM]:var:[ARTIFACT-OVAL-ID]" />
</snmp_state>

Variable

<external_variable
  id="oval:org.cisecurity.benchmarks.[PLATFORM]:var:[ARTIFACT-OVAL-ID]"
  datatype="string"
  comment="This value is used in Rule: [RECOMMENDATION-TITLE]"
  version= "1">

YAML

artifact-expression:
  artifact-unique-id: "[ARTIFACT-OVAL-ID]"
  artifact-title: "[ARTIFACT-TITLE]"
  artifact:
    type: "[ARTIFACT-TYPE-NAME]"
    parameters:
  test:
    type: "[TEST-TYPE-NAME]"
    parameters:
      - parameter:
          name: "operator"
          dt: "string"
          value: "[operator.value]"
      - parameter:
          name: "access_list"
          dt: "string"
          value: "[access_list.value]"

JSON

{
  "artifact-expression": {
    "artifact-unique-id": "[ARTIFACT-OVAL-ID]",
    "artifact-title": "[ARTIFACT-TITLE]",
    "artifact": {
      "type": "[ARTIFACT-TYPE-NAME]",
      "parameters": []
    },
    "test": {
      "type": "[TEST-TYPE-NAME]",
      "parameters": [
        {
          "parameter": {
            "name": "operator",
            "type": "string",
            "value": "[operator.value]"
          }
        },
        {
          "parameter": {
            "name": "access_list",
            "type": "string",
            "value": "[access_list.value]"
          }
        }
      ]
    }
  }
}